Lathe Tracer
Secondary Feed With Fine Cutting Tracing Control Valve
The Lathe Tracer with Secondary Feed and Fine Cutting Tracing Control Valve is a precision-engineered solution tailored for lathe machines and other specialized machinery, ensuring exceptional performance in high-precision machining operations. This advanced tracer enables the accurate replication of intricate patterns and complex contours, making it indispensable for industries that demand superior craftsmanship, efficiency, and consistent quality in their production processes.
Features and Benefits
The CY-X series adds a fine cutting tracing control valve to the standard lathe tracer, so one cycle performs a rough pass and then a finish pass. It suits workpieces with a large stock allowance or tighter dimensional and surface requirements.
- Rough and finish turning in one cycle: the first pass removes most of the stock, the second pass is a finish cut guided by the fine cutting valve. No tool change and no re-setting (see the cycle diagram below).
- Finish allowance adjustable 0–2 mm: set the finishing stock to suit the material and surface requirement.
- Precision servo control: the finish pass follows the template profile more closely.
- Same specifications as the standard series: CY-80X to CY-360X share working pressure, oil tank and hydraulic stroke with the standard model of the same size, and are selected the same way, by lathe swing.
- Proven installation: a CY-180X was fitted to a Sunmaster FC-1840 lathe on site, test-cut and shipped to a customer in Canada. Read the case study
Only need a single pass? For simple profiles with a small stock allowance, the single feed lathe tracer is enough and sets up faster.
Standard CY vs. CY-X Series
| Standard CY (single feed) | CY-X (secondary feed) | |
|---|---|---|
| Feed | Single pass | Rough + finish pass |
| Fine cutting tracing control valve | — | ✔ (0–2 mm adjustable) |
| Models | CY-40 to CY-360 (7 models) | CY-80X to CY-360X (6 models) |
| Best for | Simple profiles, small stock allowance | Large stock allowance, high surface finish |
| Set-up time | Shorter | Extra finish-allowance setting |
| Investment | Lower investment | Higher investment |
Fine Cutting Tracing Control Valve
(Standard Equipment on CY-X Series)
The Core of CY-X Efficiency: Semi-Automated Finishing for Maximum Convenience.
Provides exceptional control over the tracing and cutting process, allowing operators to achieve smooth finishes on even the most delicate materials.
- The fine cutting tracing control valve employs a high precision servo control valve. It provides extra fine cutting performance, and creates fine finish effect on work piece surface.
- Fine cutting amount is adjustable from 0 to 2 mm.

How to use the fine cutting tracing control valve:
- Set the finish allowance (0–2 mm) on the fine cutting valve to suit the material and surface requirement.
- Rough pass: start the tracing cycle; the first pass follows the template and removes most of the stock.
- Retract: at the end of the rough pass, retract the tool and return to the start point.
- Finish pass: the second pass, guided by the fine cutting valve, finishes the profile to the template.
Coarse and Fine Cutting Cycle Diagram
The CY-X series Hydraulic Lathe Tracer Attachment is equipped with a tracing control valve. It permits coarse and fine cutting at a time, that saves work piece loading and uploading time while greatly upgrading machining efficiency.

Specification
| The type or size of the imitation device | Pressure | Oil Tank Capacity (Liter) | Cylinder Bore | Horse Power | Effective Storke at 45°(mm) | Hydraulic Stroke (mm) | Range of Tool Adjustment(mm) | Chip Section(mm²) |
|---|---|---|---|---|---|---|---|---|
| CY-80X | 12-15 | 30 | 45 dia | 1/2 HP | 57 | 80 | 30 | 3 |
| CY-120X | 12-15 | 30 | 50 dia | 1/2 HP | 85 | 120 | 30 | 4 |
| CY-180X | 15-18 | 40 | 55 dia | 1 HP | 128 | 180 | 30 | 5 |
| CY-240X | 16-20 | 45 | 63 dia | 1 HP | 170 | 240 | 30 | 6 |
| CY-300X | 16-20 | 45 | 65 dia | 1 HP | 213 | 300 | 30 | 8 |
| CY-360X | 16-20 | 50 | 65 dia | 2 HP | 260 | 360 | 30 | 8 |






